Skip to content
What is plastic?

What is plastic? Plastic Production, Recycling & Co.

What is plastic? A valid question that deserves an answer. Because we use plastic objects every day, and as I write this article about plastics, my fingers are hitting a plastic keyboard. We come into contact with plastic every day and it seems that plastic enhances our quality of life. But what is plastic actually? How is plastic made and what material is used to make plastic? 

In this article I would like to answer these questions about plastic and also explain more about the advantages and disadvantages, plastic as an economic factor and environmental problem, as well as the recycling of plastic waste. You'll also learn why plastic is not just plastic. Let's go!

Here is a short table of contents of the article on plastics

  1. Production
  2. Forms features
  3. Advantages and disadvantages
  4. Economic factor
  5. Environmental problem
  6. Recycling
  7. Alternatives
  8. Conclusion

Plastic - production & history of plastic

In the days when plastic was still a thing of the future, milk was stored in glass bottles and large jugs and Wooden toothbrushes were part of the standard. In 1839, Charles Goodyear's combination of rubber and sulfur set the ball rolling for plastics production, which was unstoppable. Almost 100 years and a few development attempts later, plastic was then regularly rolling off the production line. While one million tons were initially produced worldwide in 1950, today we produce around 370 million tons of plastic every year.

With the development of the PET bottle at the end of the 1960s, plastic finally took off and really took off. So far, plastic is the only material that is light, break-resistant, elastic, temperature-resistant and, above all, can be produced in different degrees of hardness. As soon as a rudimentarily similar flexible, mass-produced and hopefully biodegradable material comes to light, plastic as we know it will become superfluous. But what is plastic actually? And how is plastic produced in the first place?

What is plastic - plastic production, plastic production petroleum
The processed limited raw material petroleum later results in plastic in a wide variety of forms.

As many people know, plastic is made from the limited raw material petroleum. But until the finished plastic bottle, several more steps of plastic production are necessary.

  1. Crude oil is distilled and the valuable raw material for plastic Raw gasoline In addition to crude gasoline, other components of petroleum are produced in the form of gas, diesel, fuel oils and gasoil.
  2. Crude gasoline / napthta is replaced by the Cracking process to ethylene, propylene, butylene and other hydrocarbon compounds.
  3. Through Synthesis (polymerization, polycondensation or polyaddition), plastic can then finally be produced and shaped as desired.

So-called monomers are strung together and synthesized to form net- and chain-like molecules, the polymers. However, not all plastics are the same. Therefore, the selected manufacturing process or the desired end product determines what shape the plastic will later have.

The 3 types of plastic production

In order to be able to produce plastic bottles, dishwashing sponges and other items from plastic, therefore, with the help of Synthesis process several building blocks (monomers) are combined to form chains (polymers). The following 3 syntheses₁ are used to produce plastics:

Polymerization: Several small molecules are strung together to form one large molecule. The result of polymerization is, for example, the plastics polystyrene (PS), polypropylene (PP) and polyethylene (PE).

Polycondensation: In polycondensation, different starting materials are combined to form a molecule. In contrast to polymerization, a by-product is formed, e.g. water. Thermoplastics or thermosets are formed (see next paragraph: Forming plastics).

Polyaddition: Different starting materials are joined together by migration of hydrogen atoms without forming a by-product. One end product is polyurethane (PUR), for example.


By loading the video, you accept YouTube's privacy policy.
Learn more

Load video

The video explained it well once again. The choice of the synthesis process ultimately determines the characteristics of the subsequent plastic product. In the following paragraph, I would like to explain to you why not all plastics are the same and which characteristics distinguish plastics from each other.

Plastic molds - differences & features of plastic

Plastic means progress. Plastic helps us to be able to design things flexibly. Very flexible. Because plastic can be distinguished by many characteristics and can be designed as desired. For example, plastics can be distinguished by the following characteristics:

  • Tensile strength
  • Hardness / Density
  • Elongation at break
  • Dielectric strength
  • Moisture absorption
  • Temperature range
  • Heat resistance

So far, plastic is the only material that is light, unbreakable, elastic, temperature-resistant and can be produced in different degrees of hardness. As soon as a rudimentarily similar flexible material that is suitable for mass production and hopefully biodegradable comes to light, it will make plastic obsolete. Such as polylactic acid (PLA for short), a bioplastic made from corn starch and sugar cane. But so far, there is no dedicated recycling system for plastics made from natural materials because of the small quantities involved. Soy, corn, sugar cane and the remains of shellfish have the potential to replace plastic in the long term.

The 3 forms of plastic

Basically, there are three different forms of plastic, which differ according to the characteristics mentioned. I'll give you an example of the plastic form so that you can better imagine it:

  • Thermoplastics: This plastic mold is very flexible and can be changed into any shape by heating as often as desired. Thermoplastics consist of uncrosslinked polymers. (e.g. plastic cups)
  • Thermosets: Can only be heated and deformed once and is usually hard and brittle. Thermosets consist of tightly cross-linked polymers. The Trabant was always called the "thermoset bomber", maybe now you know why 🙂 (Another example: socket housing)
  • Elastomers: This is plastic that can be bent by hand and is very elastic. Elastomers consist of wide-meshed cross-linked polymers.(e.g. rinsing sponge)

To ensure that the plastic is really super-flexible after production, so-called additives are mixed in during the production of the plastic. These can be Plasticizer, colorants, stabilizers, flame retardants and many other things.

And these are the most important plastics at present:

  1. Polyethylene (PE): e.g. for beverage crates, buckets, bowls. Polyethylene is very difficult to break. Under adapted form, polyethylene has ideal film-forming properties is used especially for the production of packaging films, CD's or even books.
  2. Polypropylene (PP): e.g. for gas pedals, toilet lids, eyeglass cases. Polypropylene is a very hard, resilient plastic with a very low density.
  3. Polyvinyl chloride (PVC): e.g. for floor coverings and sewage pipes. Polyvinyl chloride is very resistant to aggressive acids and is basically hard and brittle.
  4. Polystyrene (PS): e.g. for insulation and packaging material. Polystyrene repels moisture and is better known as Styrofoam.
  5. Polyurethane (PUR): e.g. for textile fibers, mattresses. Polyurethane is a very elastic plastic that can be varied as desired by adding further chemicals.
  6. Polyethylene terephthalate (PET): e.g. for plastic bottles, computers, implants. Polyethylene terephthalate has high stiffness and is very hard.

Advantages and disadvantages of plastic (plastic)

Even though we argue against plastic very often here on the blog, the plastic has of course not only Disadvantages. It increases our quality of life and ensures that our cars consume less and the heat stays in our homes. Here I have compiled a small table with the advantages and disadvantages of plastic, which you are welcome to expand with a comment of this article.

FlexibleNon biodegradable
Cost-effectiveSubstances hazardous to health (BPA, PVC, Phthalates)
Heat insulatingCombustible
Electrically insulatingRequires petroleum (limited raw material)
Enables fuel saving (car, plane, etc.)Plastic waste problem in the environment
ReusableNot scratch resistant
EasyCan be attacked by organic solutions

Plastic products - plastic as an economic factor

Plastic is incredibly important for the economy. Around 370 million tons of plastic are now produced every year. Plastic can currently still be procured cheaply and is used by companies not only for the products themselves, but also for product packaging. Cars can be made very light with the plastic, so that they have lower fuel consumption. Even airplanes are so light due to the plastic that they consume significantly less kerosene.

Renewable energy, such as wind energy, could also not be captured without plastic. Plastic has a massive impact on the economy. Of course, plastic manufacturers themselves are particularly resisting the emerging plastic-free movement and the penchant for natural living. Many companies can only be persuaded to put less plastic waste into circulation through controlled laws. Starting in 2019, the German government will introduce a new packaging law that will make companies more accountable in this regard.

Plastic in the environment - plastic as an environmental problem

What is plastic? Plastic waste duration until decomposition

Even if plastic is obtained from a natural raw material, the plastic is not biodegradable. Plastic does not rot. Exactly this property ensures that plastic has also caused an environmental problem. A plastic bottle remains in the ocean for at least 450 years until it decomposes into smaller Microplastics has decomposed. Above this paragraph, I have shown you a graphic₂ about the approximate decomposition time of things made of plastic.

That in a massive way Plastic waste into the environment is of little interest to the majority of companies. Profit is in the foreground. This greed for money, combined with a lack of education and weak recycling systems, has gradually created the biggest environmental problem of our time, next to climate change: Plastic waste in the sea. Every year, about 32 million tons of plastic waste are released into the environment, and 8 million tons of this plastic end up in the sea. Tendency rising. Especially for many developing countries in the Southeast Asian region, the plastic came too suddenly and has greatly increased the quality of life. When plastic was introduced, the entire world did not think about the consequences we are facing now.

There are many Aid projects against plastic waste and many people who are really active in combating plastic waste. On the one hand, we now have to eliminate the existing plastic waste, but on the other hand we have to get to the root of the evil. Because every individual has to question his handling or his consumption and know how to Avoid plastic waste can.

Plastics recycling

Here in Germany, about 90% of all plastic waste is collected again, but only 43% of it is actually recycled. More than half of plastic waste is incinerated in German waste incineration plants and not recycled. The reason why so much plastic is incinerated and not recycled is the higher profit of the disposal companies. If the disposal company takes the collected waste to the incineration plant, it earns better from it than if it takes the plastic waste for recycling.

The German government urgently needs to do something here to make recycling more attractive for the companies that are directly involved in the recycling process. Nevertheless, Germany is considered an absolute role model when it comes to the topic of Plastic waste recycling concerns. About 65 percent of municipal waste is recycled. A major problem for recycling companies are plastic items that consist of different plastic shapes. This makes it difficult to separate the plastic from one another.

Plastic alternatives and bioplastics

The bristles of the wooden toothbrushes from CareElite are made of charcoal and a Bioplastics which is biodegradable. So there are already many alternatives to the traditional plastic made from petroleum, but the recycling plants are not yet geared to the new plastics, so recycling is currently very laborious. So as mentioned earlier in the post, there are already some ideas and materials that have the potential to be a real and sustainable alternative to plastic. These include:

Polylactic acid (PLA)

Danone has already presented a yogurt cup made of PLA, which is 25% better than the production of conventional cups. Unfortunately, PLA can only be produced industrially and at high temperatures. Plants are needed for this. Cornstarch is already widely used (market share of 80%) for the production of Bioplastics used. Polymers can also be made from Sugar cane in the production of the new products. In Brazil, Braskem is the largest producer to date. Yeast fungi ferment the sap of sugar cane into ethanol. PLA can also be produced from beets.


The natural polymer is a breakdown product in shellfish. Spiders, insects and crustaceans also have it in their shells. Chitin is proven to be biodegradable and holds great potential to eventually replace plastic.


The fungus can be grown regardless of location and climate and can be produced in an environmentally friendly way. This alternative to plastic can theoretically be grown anywhere, but research here is still in its infancy.

Sodium alginate

An Icelandic student experimented a bit with red seaweed and water and used it to develop a bottle that is sufficiently strong for storage and even edible. Since the bottle is made of natural materials, it decomposes after a short time.

Wheat and barley

Especially plastic rings from six-packs of beer or other drinks are a great danger for marine mammals and seabirds. An American company has therefore made these rings from wheat and barley, which animals can eat.


Does it have to be Styrofoam? No, pressed straw is just as insulating and even absorbs moisture. The project was started by the company Landbox.

Notice: Please drop me a comment if I have forgotten a plastic alternative. At Plastic alternatives from research you can find more information. By the way, besides the "real" alternatives, there are also ways to make existing plastic waste decompose faster. A researcher has discovered by chance that the Caterpillars of the great wax moth (Galleria mellonella) eat plastic and decompose an ordinary plastic bag in a short time. Another possibility is offered by the Bacterium Ideonella sakaiensis 201-F6. The bacteria preferentially eat the plastic PET and can help remove plastic from the environment.

Conclusion - What is plastic?

The invention of plastic has greatly enhanced our quality of life. While we use the Plastic advantages we did not have a clear view of the problems that plastic has brought with it over time. After all, plastic is not biodegradable and consumes petroleum, a resource that is limited for us. Now, every year, we bring about 32 million tons of plastic waste into the environment and especially into the oceans, which does not eliminate itself.

We have to learn how to use plastic in the best possible way. Because I, too, have no doubt that it enhances our quality of life. We just must not be so naive as to ignore the problems resulting from plastic. Otherwise we will have (see the article Plastic waste statistics), there will be about 3 times as much plastic in the oceans as there are fish by 2050.

Stay clean,

Christoph from CareElite

PS.: I have this worldwide Beach CleanUp group on Facebook was created. All members share their personal actions against plastic waste in the environment. Become a part of it too 🙂

₁ Synthesis process at

₂ Oliver Lüde / Museum of Design Zurich, ZHdK

Coffee box Suggestions for improvement Newsletter

* Links with asterisks are so-called Affiliate links. If you click on it and buy something, you automatically and actively support my work with, because I get a small share of the sales revenue - and of course the product price does not change. Thank you for your support and best regards, Christoph!


Christoph Schulz

I'm Christoph, an environmental scientist and author - and here at CareElite I'm campaigning against plastic waste in the environment, climate change and all the other major environmental problems of our time. Together with other environmentally conscious bloggers, I want to give you tips & tricks for a naturally healthy, sustainable life as well as your personal development.

39 thoughts on “Was ist Plastik? Kunststoff Herstellung, Recycling & Co.”

  1. Hello Christoph,
    is any form of plastic made by heating? And what if plastic melts, does it become toxic? I've had discussions with people who said that plastic would not be toxic if, for example, a cigarette comes to a plastic bag and it melts.
    Many greetings,

    1. Hello Maike,
      Sorry for my late reply. It is toxic in combination with heat. Plastic is poison, but in solid form nothing happens. Of course, when it is heated, the toxins are released. But I can't tell you for sure if it's really like that with every plastic form.
      Many greetings

      1. Hello Christoph,
        The main thing is to maintain that plastic is girft. To then immediately put it into perspective again....
        The example of the bag given here can be easily explained. Bag = polyethylene = [C2H4]n. So the bag consists of carbon and hydrogen. When combined with heat, the plastic melts and the macromolecules can move freely. Where does poison arise? During combustion oxygen is added and CO2 and water are produced. Where is the poison?
        VG Olaf

        1. Hi Olaf! During the melting process toxic dioxins can be produced and it plastic is poison for our body. But I admit that it is formulated a bit exaggerated.
          Many greetings,

            1. Hi Olaf! Which statement? Look under the itemizations under the contribution, there you find out still more about the production.
              Many greetings

      2. Brigitte Stermberh

        Hello Christoph,
        your article was very helpful, because a normal mortal like me knows very little about plastic. That the resources of petroleum are diminishing is known and it surprises me that so little is done to work with alternatives, as mentioned. A new industry could develop, which would not only give economic impulses to the farmers with sugar cane and corn, no and that is in my eyes very crucial, one would make oneself independent of the oil states. The car industry is also taking a step in the right direction with electric cars. It's all just a question of time.
        The fact is that research is being carried out.
        Which companies are starting in terms of corn, sugar cane. ... alternative to oil and in which countries.
        Thank you

        1. Hi Brigitte! I totally agree with you, thanks for your comment!
          In Germany, for example, there is "FKuR", the biological plastic produce. Suppliers such as Papstar, for example, sell "paper plates" made from sugar cane, which would decompose in the environment.
          Stay clean,

      3. A beautiful, valuable and interesting blog. With many good links. Thank you. I'm a bit flegmatic myself, unfortunately; on the one hand I want to change something, but on the other hand I'm somehow also trapped in everyday life. After two weeks my son and I have a yellow bag completely full of packaging waste. Although I always resolve to buy more consciously (meat and sausage from the butcher-naturally with much less packaging, fruit and vegetables from the market), the bag is only slowly getting emptier 🙁 You can force the industry with requirements, but then somewhere again a gap is found. M.E. there is only the way, which my son and I take: buy less plastic packaging. The consumer makes the market - not the industry.
        As Michael Jackson sang, if you want to change the world, start with the one in the mirror. On our last vacation in Turkey in Kusadase (Aegean Sea) we went into the sea at the "Long beach" and always brought two handfuls of plastic waste ashore after each swim and (hopefully) disposed of it properly. If everyone had done this, the bathing fun for many others (especially children) would be much greater.

        1. Hello Alexander! Sorry for my late feedback.
          I'm glad you want to become more plastic-free! Currently, something is changing from only sides. From 2019, manufacturers will be held responsible for the packaging they put into circulation and many people in our society are educating themselves about the plastic waste problem.
          Use this as an impetus to also specifically look for alternatives in terms of the Zero Waste Lifestyle to find.
          Stay clean,

      Leave a Reply

      Your email address will not be published. Required fields are marked *